ST-100-TS1 / 2Steel Tool Storage Pergola
Steel Tool Storage Pergola
A steel pergola with a tool storage room: one end is closed in for tools and garden equipment, the rest is a covered outdoor area. 3 × 5 or 3 × 6 m at 2.4 m high; manual louvered roof; ZAM-coated steel; 70 kg/m² snow load; freestanding.
- Posts100×100×0.8/1.3 mm
- Snow load70 kg/m² (14.3 psf)
- Louver roofManual
- InstallationFreestanding
- Sample orderFrom 1 set
- Lead time15–30 days
- Warranty5 years on structure
- PaymentT/T
- ShippingFOB Shenzhen; other ports on request
- Factory tourLive video with our staff
- 46,000 m²Own factory in Dexing, Jiangxi
- 4Automated production lines
- 58Countries we export to
- ~4,500Sets made every month
See the factoryPhotos, film or a live video tour↓Configure Your ST-100-TS
Choose a standard size and send your finish and accessory requirements. We confirm the available finish and accessory fit with your quotation.
Steel frames come in standard sizes. For non-standard dimensions, see the aluminum range.
Request this configurationWhat Is the ST-100-TS?
A steel pergola with a tool storage room: one end is closed in for tools and garden equipment, the rest is a covered outdoor area. 3 × 5 or 3 × 6 m at 2.4 m high; manual louvered roof; ZAM-coated steel; 70 kg/m² snow load; freestanding.
- Storage room built into the frame
- Two sizes: 3 × 5 and 3 × 6 m
- 70 kg/m² snow load
- ZAM-coated steel resists rust and UV
- 70 kg/m²Snow load (14.3 psf)
- 100×100×0.8/1.3Post section, mm
- ZAMZinc-aluminum-magnesium coated steel
Features
What makes the ST-100-TS work, part by part.
Pergola with a Storage Room
One end is closed in as a tool and garden storage room; the rest is a covered outdoor area.
Two Sizes
3 × 5 m or 3 × 6 m at 2.4 m high, rated at 70 kg/m², with 100 × 100 mm posts in coated steel.
Integrated Drainage
A 54×32 mm gutter in the frame carries rain off the manual louvered roof.
Structure Drawings
How the ST-100-TS is built and installed.
1 / 2 Overall view with the storage room
Profiles
| Profile | Section | Wall |
|---|---|---|
| Post | 100×100 mm | 0.8 / 1.3 mm |
| Side beam | 150×35 mm | 1.0 mm |
| Louver blade | 180.3×34.5 mm | 0.6 mm |
| Water gutter | 54×32 mm | 0.6 mm |
Specifications
Full data for the ST-100-TS. Ask for the spec sheet with drawings.
Request spec sheet- Model code
- ST-100-***-TS-FS/G (*** = size code)
- Frame material
- Steel with zinc-aluminum-magnesium alloy coating
- Louver roof
- Manual
- Snow load
- 70 kg/m² (14.3 psf)
- Louver blades
- Single-layer blades
- Post
- 100×100×0.8/1.3 mm
- Louver blade
- 180.3×34.5×0.6 mm
- Side beam
- 150×35×1 mm
- Water gutter
- 54×32×0.6 mm
- Installation
- Freestanding, base plates anchored to a concrete foundation; special mounting on request
- Drainage
- Integrated gutters and drainage channel
- Colors
- White, dark grey, black; custom color on request
- Delivered with
- Instruction manual and installation video; remote technical support
Sizes
- 3 × 5 × 2.4 m (9.8 × 16.4 × 7.9 ft)
- 3 × 6 × 2.4 m (9.8 × 19.7 × 7.9 ft)
Built in standard sizes to keep the unit cost low. For custom sizes, see the aluminum series.
Options
Request enclosure, lighting or power options for the ST-100-TS. Compatibility, mounting details and availability require project-specific confirmation.
Zip screensW100 up to 4000×3000 mm; W125 up to 5500×3000 mm
Louvered side panelsFixed, sliding or folding; blades can rotate 180° on request
Glass doorsSliding or folding glass enclosure
WPC wall panelWood-look composite side wall
LED lightingWarm white, cool white, dual-color or RGB; motion-sensor module available
Solar power requestCompatibility and mounting details require confirmation
Compare with Similar Models
Not sure this is the right one? Here it is beside its nearest siblings.
Ask an engineerSwipe the table sideways to see all models.
| ST-100-TSThis model | ST-100-KSSteel Outdoor Kitchen Pergola | ST-100-EVSteel Carport Pergola | |
|---|---|---|---|
| Posts | 100×100×0.8/1.3 mm | 100×100×0.8 mm | 100×100×0.8 mm |
| Snow load | 70 kg/m² (14.3 psf) | 70 kg/m² (14.3 psf) | 70 kg/m² (14.3 psf) |
| Louver roof | Manual | Manual | Manual |
| Wind rating | On request | On request | On request |
| Installation | Freestanding; special mounting on request | Freestanding; special mounting on request | Freestanding; special mounting on request |
| Sizes | 3 × 5 × 2.4 m, 3 × 6 × 2.4 m | 2.5 × 2.95 × 2.4 m | 3 × 5 × 2.5 m |
| You are here | View ST-100-KS | View ST-100-EV |
Made in Our Own Factory
From steel profile to packed set, the ST-100-TS is cut, machined, assembled, tested and packed under one roof in Dexing, Jiangxi.
Live video factory tourA member of our team walks you through the production lines, test lab and warehouse on a video call, and answers your questions on the spot.
Inside the Factory
Photos from our production lines, test lab and warehouse.
Profile stock- Profile cutting
Punching
CNC drilling
Louver blades ready for assembly
Finished frame profiles
Trial assembly
Frame trial-assembled before packing
Louver inspection
Component check
Salt spray test
Profile tensile test
UV ageing test
Temperature and humidity test
Every profile wrapped and protected
Hardware packed per set
Packed sets in the warehouse
Loading for export
About the ST-100-TS
What load can the ST-100-TS carry?
The ST-100-TS is rated for a 70 kg/m² (14.3 psf) snow load with the louvers closed. In heavy-snow seasons we recommend turning the louvers vertical, as the manual describes.
What sizes is the ST-100-TS available in?
Standard sizes are 3 × 5 × 2.4 m, 3 × 6 × 2.4 m. The steel series is not made in custom sizes.
Is the ST-100-TS roof manual or motorized?
Manual: the louvers open and close with a crank. For a motorized roof, see the aluminum range.
How is the ST-100-TS installed?
It is freestanding, with base plates anchored to a concrete foundation. It ships with an instruction manual and installation video.
Can I see the factory before I order?
Yes. Book a live video factory tour: a member of our team walks you through the production lines, test lab and warehouse on a video call, shows your model or your order in production, and answers your questions on the spot.
More Steel Louvered Pergolas
Other steel louvered pergolas.
All models
ST-100-SHSteel Louvered Pergola, 180 mm Louvers
- 100×100×0.8 mm posts
- Snow load 70 kg/m² (14.3 psf)
- Manual
Get a Quote for the ST-100-TS
Send the size, quantity, options and destination. We reply within 24 hours on working days.
- Sample order
- From 1 set
- Lead time
- 15–30 days
- Warranty
- 5 years on structure
- Payment
- T/T
- Shipping
- FOB Shenzhen; other ports on request
- Factory tour
- Live video with our staff
- Emailsales@dmypergola.com
- WhatsApp+86 136 0275 9999